Boxwood ebony Damascus collector's knife with leather case

Boxwood Ebony handle Laguiole collector's knife
The Damascus blade, made with layers of superimposed steel and carbon hot worked, makes each blade a uniquely designed one-off model.This model with with species are rare and thin, and slightly fragrant.

Good connection between gabon ebony black slightly veined, and boxwood

guaranteed hand-crafted in France, with a numbered certificate of authenticity.
Each model is unique.

More details

Availability:

448,90 €

loader

Boxwood ebony Damascus collector's knife-  Damascus steel blade, with leather case (with a belt clip)

  • 8 mm thick per plate.
  • "Shepherd's cross" inlay stamped on the handle
  • Open length: 21.5 cm (12 cm closed) – 90/100gr
  • with Damascus steel blade
  • Blade: Swedish twisted stainless Damascus steel, 160 layers, long-lasting, inlaid in the metal structure
  • Hardness: 56 HRC
  • Spring: fitted with a blade-stop and the solid Laguiole bee, hammer forged and fully hand-chased (guilloched). 3 mm thick stainless steel, tempered and polished interior
  • Plates and bolsters: solid stainless steel - 1.2 mm thick
  • Finishing and polishing: plates, blade, interior spring fully chased and matt polished.


Recommendation: it is preferable not to engrave a Damascus steel blade

 

AVAILABLE - On stock

Laguiole quality :
All our blades are fine millstone sharpened by a qualified cutler. The quality of the steel, the triangular grinding and the polishing will make it easier for you to keep your knives sharp and ensure that they continue to cut true.
The springs and blades are put in a kiln heated to over 1,000°, before being rapidly cooled. Depending on the part (spring, blade, etc.) and its makeup (carbon steel, stainless steel), the tempering varies (temperature, oil / water / air, etc.). 
The tempered parts (here the springs) are plunged into an oil bath in order to give them strength and flexibility. The blades are then "marbled/billées", controlling the hardness expressed on the Rockwell scale (HRC).
Our Swedish 12C27 Sandvik stainless steel blades have a hardness of 56 HRC.
All our springs are forged and chased ("guilloched") with a file in a vice. They all have a blade-stop.
All the bees are filed twice: before assembly and before the quality control stage.
All our blades are very carefully ground and polished twice with buffalo hide by professionals: this guarantees outstanding quality and a fine cutting edge for you.
The LAGUIOLE added extra: express after-sales service - secure delivery - numbered certificate of authenticity

LAGUIOLE handmade guarantee, with certificate of authenticity
LAGUIOLE Collection - Handmade - Handcrafted in Auvergne.

These Laguiole knives, handcrafted by Fontenille Pataud, which has been producing them since the 1920s, are available to you in a wide range of prestigious, precious and elegant woods. These bespoke creations represent the result of meticulous work.
We can also personalize them, engraving your name or message, etc. If you would like other versions of Laguiole knives with handles made of wood, horn or other noble or rare materials that you cannot see on our site, or options with a corkscrew, please contact us on +33 810.410.120 during office hours (spécifier pour des étrangers?/) - cost of a local call.
The engraving on the handle is recommended. There is too little visibility and relief on the Damascus blade with alloy steel / carbon.
Delivered with numbered certificate of guarantee and authenticity.

Longueur déployé 21,5cm
Composition Lame : acier Damas suédois inoxydable et torsadé 160 couches durables dans le temps
Origin Handmade products made in France
Handle material Wood
Blade Damascus
Gravure EN
madeinfrance
Discover our best sellers